Reliable installation module for wall-hung toilets with dual flush.

If you are looking for a stylishly clean and optically balanced bathroom, it is good to reach for the hanging toilet variant as well. An essential part of the wall-hung toilet is the installation module and the concealed tank. Great features are offered by the kielle Gemini pre-wall installation module for wall-hung toilets designed for wall-hung toilets with a connection spacing of 180 mm.

Self-supporting frame

The Genesis kielle wall-mounted pre-wall installation module consists of a self-supporting steel frame, a tank with filling and draining fittings, a fixing set for holding a toilet bowl, waste elbows, fittings for water connection from above or rear (water supply is from behind) and other accessories necessary for perfect and safe installation of the wall-hung toilet. The frame construction is prepared for anchoring to a separate sufficiently load-bearing plasterboard partition or for placement in front of the load-bearing wall.

Safe care with water

The installation module also includes a concealed tank with a water volume of 9 liters (hygienic reserve is 3 liters). Thanks to the construction of polystyrene insulation, the surface of the tank does not dew and also significantly dampens the noise of rinsed water. The advantage is also that the tank is made of one piece, which guarantees its 100% impermeability. The tank is ready for double-acting (dual) flushing, while the economical flushing counts on a volume of 2.5–3.5 liters / one flushing (you will find a setting of 3/6 liters as standard).

Great variability

The installation module tries to create maximum comfort, so you will find a number of great variables here. You will certainly appreciate the possibility of regulating surface irregularities thanks to the anchoring extension legs, which can be set in the range of 0-200 mm). The possibility of tilting the tank for easy installation in wooden buildings or mobile cells is also interesting. If you want to increase the hygienic standard in your home, you can also do so through sensory or remote flushing, for which the tank is also ready.

Household with kielle

The mounting module is compatible with all kielle wall-hung toilets. The tank is then ready for all the flush buttons offered by the kielle brand. Thanks to the technical and visual interconnection of the individual elements of kielle, you have the opportunity to create a functional and at the same time beautiful space.

Pre-wall installation frame for wall-hung toilets 

• For wall-hung toilets
• For mounting in front of a support wall or in to a plasterboard construction
• For floor thickness 0–200 mm
• For installation of wall-hung WC pans with a connecting pitch of 180 mm

Properties

• Holder for the waste connector 
• Dual flush independently adjustable with hygienic reserve
• Compatible with all kielle flush plates
• The construction of polystyrene insulation prevents condensation forming on the surface of the tank
• The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
• Frame material: powder-coated metal
• Suitable for installation of remote or sensor flushing
• Possibility of tilting the cistern for easy installation in wooden construction buildings or mobile cells
• The cistern is made of one piece, thus ensuring 100% impermeability
• The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring element
• Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
• Water supply from the rear
• Angle valve with the ability to connect to the Mepla piping system
• Installation depth 125 mm
• Visible leveling mark on the tank
• Cistern hinges made of two-component material insulate the transmission of vibrations from buildings

Technical features

• Recommended range of water pressure  0,3 – 0,5 MPa
• Functional range of water pressure 0,05 – 1,6 MPa
• Hygienic reserve 3 l
• Small flush 2,5 - 3,5 l
• Big flush 6 -9 l
• Water volume in the cistern 9 l
• Water connection from the back or top via mounting holes G1/2 "
• The default setting of small flush 3 l
• The default setting of large flush 6l 
• Load test 400 kg

Scope of supply

• Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
• Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
• Elbow waste connector HT 90/90 polyethylene, PE-HD
• Combi screw M10 x 180 2 pcs
• Cistern with fill and flush valve
• Polystyrene cover of service opening
• Waste reduction HT 90/110 polyethylene, PE-HD
• Self-supporting frame
• Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
• Drainage seal, PP connector, connector seal
• Inlet seal, PP outlet, wrapping seal